 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DM Series Single and Dual Output 15 Watt DC/DC Converter 2:1 Wide Input Voltage Range FEATURES APPLICATIONS Measurement 15 Watts Output Power Wireless Network Output Current up to 4A Telecom/Datacom High Efficiency up to 88% Industry Control System Fixed Switching Frequency Semiconductor Equipment Six-Sided Continuous Shield 2:1 Wide Input Voltage Range Standard 2 x 1 x 0.4 inch Package ISO9001 Certified Manufacturing Facilities Compliant to RoHS EU Directive 2002/95/EC Options: Positive Logic and Negative Logic Remote ON/OFF SPECIFICATIONS: DM Series All specifications apply @ 25C ambient unless otherwise noted INPUT SPECIFICATIONS Input Voltage Range ............ 12V nominal input ....................... 9 - 18 VDC 24V nominal input ..................... 18 - 36 VDC 48V nominal input ..................... 36 - 75 VDC Input Filter ....................................................................................... Pi Type Input Surge Voltage (100ms max) ....... 12V input ..........................36 VDC 24V input ..........................50 VDC 48V input ........................100 VDC Input Reflected Ripple Current (Note 2)........................................20mAp-p Start Up Time (nominal Vin and constant resistive load) .............20ms typ. Remote ON/OFF (Option) (Note 7) (Positive Logic)............. DC-DC ON .............Open or 3.5V < Vr < 12V DC-DC OFF .............Short or 0V < Vr < 1.2V (Negative Logic)............ DC-DC ON ...............Short or 0V < Vr < 1.2V DC-DC OFF ...........Open or 3.5V < Vr < 12V Input Current of Remote Control Pin (nominal Vin) ........... -0.5mA ~ +1mA Remote Off State Input Current (nominal Vin) ...................................20mA GENERAL SPECIFICATIONS Efficiency ........................................................................................see table Switching Frequency ...................... Single Output ....................500KHz typ. Dual Output.......................300KHz typ. Isolation Voltage (Input to Output)......................................... 1600VDC min. Isolation Resistance ...............................................................10 ohms min. Isolation Capacitance ................................................................ 300pF max. 9 ENVIRONMENTAL SPECIFICATIONS Operating Temperature ................................ -40C ~ +85C (with derating) Storage Temperature .......................................................... -55C ~ +105C Maximum Case Temperature ............................................................. 100C Relative Humidity...................................................................5% to 95% RH Thermal Impedance (Note 8) Natural Convection ............................................................. 12C / Watt Natural Convection with Heat-Sink..................................... 10C / Watt Thermal Shock ..................................................................... MIL-STD-810F Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z MTBF (See Note 1) .......................................................... 2.041 x 10 hours 6 OUTPUT SPECIFICATIONS Output Voltage ..............................................................................see table Voltage Accuracy (nominal Vin and full load) ...................................... 1% Output Current ..............................................................................see table Output Power ........................................................................ 15 watts max. Line Regulation (LL to HL at FL).............................................. 0.5% Load Regulation (min load to full load) .... Single Output............... 0.5% Dual Output.................... 1% Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ 5% Minimum Load (See Note 6) ........................................................see table Ripple/Noise (20 MHz BW) ...................... Single Output..............50mVp-p Dual Output ................75mVp-p Temperature Coefficient ................................................. 0.02% / C max. Transient Response Recovery Time (25% load step) .......................250us PHYSICAL SPECIFICATIONS Weight ..................................................................................... 27g (0.95 oz) Dimensions....................... 2.0 x 1.0 x 0.40 inches (50.8 x 25.4 x 10.2 mm) Case Material ..............................................................Nickel-coated copper Base Material...................................................Non-conductive black plastic Potting material..................................................................Epoxy (UL94-V0) Shielding......................................................................................... six-sided SAFETY & EMC Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1 EMI (Note 9) ...............EN55022 ...................................................... Class A ESD ....................EN61000-4-2........ Air 8KV .......Perf. Criteria B Contact 6KV PROTECTION SPECIFICATIONS Over Voltage Protection................. 3.3V output ..................................3.9V (zener diode clamp) 5V output ..................................6.2V 12V output ...................................15V 15V output ...................................18V Over Load Protection (% of full load at nominal input).............. 150% max. Short Circuit Protection. ...................................Hiccup, automatic recovery Radiated Immunity......EN61000-4-3 ....................... 10V/m Perf. Criteria A Fast Transient.............EN61000-4-4 ......................... 2KV Perf. Criteria B Surge (Note 10) ..........EN61000-4-5 ......................... 1KV Perf. Criteria B Conducted Immunity...EN61000-4-6 .................... 10 Vrms Perf. Criteria A Due to advances in technology, specifications subject to change without notice Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DM Series Single and Dual Output 15 Watt DC/DC Converter 2:1 Wide Input Voltage Range OUTPUT VOLTAGE / CURRENT RATING CHART Model Number DM12S3.3-4000 DM12S5-3000 DM12S12-1250 DM12S15-1000 DM12D5-1500 DM12D12-625 DM12D15-500 DM24S3.3-4000 DM24S5-3000 DM24S12-1250 DM24S15-1000 DM24D5-1500 DM24D12-625 DM24D15-500 DM48S3.3-4000 DM48S5-3000 DM48S12-1250 DM48S15-1000 DM48D5-1500 DM48D12-625 DM48D15-500 Input Range Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output Current Min. load Full load 0mA 15mA 0mA 0mA 0mA 0mA 10mA 0mA 15mA 0mA 10mA 0mA 0mA 0mA 0mA 0mA 10mA 0mA 0mA 0mA 0mA 4000mA 3000mA 1250mA 1000mA 1500mA 625mA 500mA 4000mA 3000mA 1250mA 1000mA 1500mA 625mA 500mA 4000mA 3000mA 1250mA 1000mA 1500mA 625mA 500mA Output (4) Ripple & Noise 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 75mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 75mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 75mVp-p (5) Input Current (4) Capacitor (3) (2) Efficiency Load max No load Full load 12 VDC (9 - 18 VDC) 24 VDC (18 - 36 VDC) 48 VDC (36 - 75 VDC) 30mA 25mA 25mA 20mA 20mA 30mA 35mA 15mA 10mA 20mA 15mA 15mA 25mA 25mA 10mA 20mA 15mA 15mA 10mA 15mA 15mA 1467mA 1603mA 1524mA 1524mA 1582mA 1524mA 1563mA 724mA 781mA 772mA 772mA 781mA 762mA 762mA 357mA 396mA 377mA 381mA 386mA 372mA 377mA 79% 82% 86% 86% 83% 86% 84% 80% 84% 85% 85% 84% 86% 86% 81% 83% 87% 86% 85% 88% 87% 10200uF 7050uF 1035uF 705uF 1020uF 495uF 165uF 10200uF 7050uF 1035uF 705uF 1020uF 495uF 165uF 10200uF 7050uF 1035uF 705uF 1020uF 495uF 165uF NOTES BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40C. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specifications. 7. The ON/OFF control pin voltage is referenced to -Vin. To order positive logic ON-OFF control add the suffix P (Ex: DM48S5-3000P) To order negative logic ON-OFF control add the suffix R (Ex: DM48S5-3000R) 8. Heat sink is optional, consult factory. 9. The DM Series can meet EN55022 Class A with an external capacitor in parallel with the input pins. Recommended: 12Vin: 6.8F/50V 24Vin: 2.2F/50V 48Vin: 1.5F/100V 10. An external filter capacitor is required if the module has to meet EN61000-4-5. The filter capacitor Wall Industries suggests: Nippon chemi-con KY Series 220uF/100V ESR 48m. 1. 2. 3. 4. 5. 6. DERATING CURVES & EFFICIENCY GRAPHS O UOutput P O W E (%) ) T P U T Power R (% 100 80 60 40 20 0 -40 -20 0 20 40 6063 80 100 120 Output Power E R (% ) O U T P U T P O W (%) 120 FEC15-48S05 Derating Curve DM48S5-3000 Derating Curve 120 100 80 60 40 20 0 DM48S5-3000 FEC15-48S05 Derating Curve Derating Curve8With Heat Sink (Note 8) With Heatsink (Note ) Ambient Temperature (C) -40 -20 0 20 40 60 69 80 100 120 AMBIENT TEMPERATURE() Ambient Temperature (C) AMBIENT TEMPERATURE() 95 90 85 80 75 70 65 60 55 50 45 FEC15-48S05 DM48S5-3000 Efficiency vs Output Load Efficiency VS Output Load 86% 84% 82% 80% 78% 76% 74% Efficiency (%) E F F IC IE N C Y (% ) FEC15-48S05 DM48S5-3000 Efficiency vs Input Voltage Efficiency VS Input Voltage E Efficiency Y (% ) F F IC IE N C (%) 10 20 30 40 50 60 70 80 90 100 36 40 44 48 52 56 60 64 68 72 Output Load (% of of Full Load) OUTPUT LOAD (% Full Load) INPUT VOLTAGE (V) (V) Input Voltage Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DM Series Single and Dual Output 15 Watt DC/DC Converter 2:1 Wide Input Voltage Range MECHANICAL DRAWING 1.00 (25.4) 0.50 (12.7) DIA. 0.04 (1.0) 0.400 (10.16) 0.400 (10.16) 0.40 (10.2) PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE +INPUT -INPUT +OUTPUT NO PIN -OUTPUT CTRL (Option) DUAL +INPUT -INPUT +OUTPUT COMMON -OUTPUT CTRL (Option) BOTTOM VIEW 1 2 6 0.100 (2.54) 0.200 (5.08) 0.60 (15.2) 0.800 (20.32) 2.00 (50.8) 3 4 5 0.22 (5.6) 1. All dimensions in Inches (mm) Tolerance: X.XX0.02 (X.X0.5) X.XXX0.01 (X.XX0.25) 2. Pin pitch tolerance 0.01(0.25) 3. Pin dimension tolerance 0.004 (0.1) FIGURE 1 PIN 2 3 4 5 INPUT 6 PIN CONNECTION SINGLE - INPUT + OUTPUT NO PIN - OUTPUT L1 3 4 CTRL (Option) C1 C2 -Vin -Vout DUAL - C3 INPUT + OUTPUT COMMON - OUTPUT +Vin +Vout CTRL (Option) Load FIGURE 2 Recommended EN55022 Class B Filter Circuit Layout 1 + INPUT + INPUT Recommended Filter for EN55022 Class B Compliance -INPUT DM SERIES +INPUT TOP VIEW INPUT 1 2 D/D Converter C4 The components used in the Figure 1, together with the manufacturers' part numbers for these components, are as follows: C1 DM12xxx-xxxx 4.7uF/50V DM24xxx-xxxx 3.3uF/50V C2 N/A N/A C3 1000pF/2KV 1000pF/2KV 1000pF/2KV C4 1000pF/2KV 1000pF/2KV 1000pF/2KV L1 325uH Common Choke 325uH Common Choke 325uH Common Choke DM48xxx-xxxx 2.2uF/100V 2.2uF/100V Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of DM24D15-500
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |